IKEA FRAMTID HGC4T User Manual

Also see for FRAMTID HGC4T: Instruction manual

Contents

Technical dataRating Plate901.560.49Made in Germany© Inter IKEA Systems B.V. 199921552PQM DGT230 VModel FRAMTID HGC4T Typ 55HAD64AO 6.5kWPNC 949 593 108 S NO ...................... 220V-240V AC 50 HzThe graphic above represents rating plate ofthe appliance (without serial number which isgenerated dynamically during the productionprocess), which is located at its underneathsurface of the casing.Dear Customer, please apply here aside thesticker you can find in the dedicate plastic baginserted inside the hob packaging. This will al-low us to assist you better, by identifying pre-cisely your hob, in case you will need in futureour assistance. Thank you for your help!InstallationManufacturer is not responsible for any injuryto persons and pets or damage to propertycaused by failure to comply following require-ments.Caution! To proceed with the installationrefer to the assembly instructions.Warning! Installation process must followthe laws, ordinances, directives andstandards (electrical safety rules andregulations, proper recycling in accordancewith the regulations, etc.) in force in the countryof use!Warning! The appliance must beearthed!Warning! Risk of injury from electricalcurrent.• The electrical mains terminal is live.• Make electrical mains terminal free of volt-age.• Loose and inappropriate plug and socketconnections can make the terminal over-heat.• Have the clamping connections correctly in-stalled.• Use strain relief clamp on cable.• Follow the connection diagram (it is locatedon the underneath surface of the casting ofthe hob).Important! You must observe the minimumdistances to other appliances and furniturecabinets or other units according to AssemblyInstruction.If there is no oven beneath the hob insert a di-viding panel at a minimum distance of 20 mmfrom the bottom of the hob.ENGLISH 9