IKEA IX5HHEXWS05 User Instructions

Also see for IX5HHEXWS01: Parts list

Contents

IKEA IX5HHEXWS05 User Instructions Manual pdf 9 page image

Adjusting ControlsIf you need to adjust the temperature in either the refrigerator orfreezer compartment, use the settings listed in the chart below asa guide.For controls press the up or down arrow touch pads. Except whenstarting the refrigerator, do not adjust either control more than onesetting at a time. Wait 24 hours between adjustments for thetemperature to stabilize.CONDITION/REASON: ADJUSTMENT:REFRIGERATOR too warm REFRIGERATOR Controlone setting higherFREEZER too warm/too little ice FREEZER Control onesetting higherREFRIGERATOR too cold REFRIGERATOR Controlone setting lowerFREEZER too cold FREEZER Control onesetting lowerYou can control the amount of humidity in the moisture-sealedcrisper. Depending on your model, adjust the control to anysetting between FRUIT and VEGETABLES or LOW and HIGH.FRUIT / LOW (open) for best storage of fruits and vegetables withskins.VEGETABLES / HIGH (closed) for best storage of fresh, leafyvegetables.ce(on _'o_",_',_J_mode sZ;;3 b,#_, '{ISTurning the Ice Maker On/OffTo turn the ice maker ON, simply lower the wire shutoff arm.To manually turn the ice maker OFF, lift the wire shutoff arm to theOFF (arm up) position and listen for the click.NOTE: Your ice maker has an automatic shutoff. As ice is made,the ice cubes will fill the ice storage bin and the ice cubes willraise the wire shutoff arm to the OFF (arm up) position. Do notforce the wire shutoff arm up or down.Ice Production Rate• The ice maker should produce a complete batch of iceapproximately every 3 hours.• To increase ice production, lower the freezer and refrigeratortemperature. See "Using the Controls." Wait 24 hoursbetween adjustments.Remember• Allow 24 hours to produce the first batch of ice. Discard thefirst three batches of ice produced.The quality of your ice will be only as good as the quality of thewater supplied to your ice maker. Avoid connecting the icemaker to a softened water supply. Water softener chemicals(such as salt) can damage parts of the ice maker and lead topoor quality ice. If a softened water supply cannot be avoided,make sure the water softener is operating properly and is wellmaintained.Do not store anything on top of the ice maker or in the icestorage bin.REFRIGERATORCAREExplosion HazardUse nonflammable cleaner.Failure to do so can result in death, explosion, or fire.Both the refrigerator and freezer sections defrost automatically.However, clean both sections about once a month to avoidbuildup of odors. Wipe up spills immediately.IM PORTANI"."Because air circulates between both sections, any odorsformed in one section will transfer to the other. You mustthoroughly clean both sections to eliminate odors. To avoidodor transfer and drying out of food, wrap or cover foodstightly.For stainless steel models, stainless steel is corrosion-resistant and not corrosion-proof. To help avoid corrosion ofyour stainless steel, keep your surfaces clean by using thefollowing cleaning instructions.To Clean Your Refrigerator:NOTE: Do not use abrasive or harsh cleaners such as windowsprays, scouring cleansers, flammable fluids, muriatic acid,cleaning waxes, concentrated detergents, bleaches or cleanserscontaining petroleum products on exterior surfaces (doors andcabinet), plastic parts, interior and door liners or gaskets. Do notuse paper towels, scouring pads, or other harsh cleaning tools.1. Unplug refrigerator or disconnect power.2. Hand wash, rinse, and dry removable parts and interiorsurfaces thoroughly. Use a clean sponge or soft cloth and amild detergent in warm water.3. Clean the exterior surfaces.Painted metal: Wash painted metal exteriors with a clean,soft cloth or sponge and a mild detergent in warm water.Rinse surfaces with clean, warm water and dry immediately toavoid water spots.Stainless steel: Wash stainless steel surfaces with a clean,soft cloth or sponge and a mild detergent in warm water.Rinse surfaces with clean, warm water and dry immediately toavoid water spots.NOTE: When cleaning stainless steel, always wipe with thegrain to avoid cross-grain scratching.4= There is no need for routine condenser cleaning in normalhome operating environments. If the environment isparticularly greasy or dusty, or there is significant pet traffic inthe home, the condenser should be cleaned every 2 to3 months to ensure maximum efficiency.