IKEA KLASEN User Manual

Also see for KLASEN: User manual User manual User manual User guide Manual

Contents

7• Repeat test. If bubbles form again, do notuse the barbecue. Please contact yourlocal dealer for assistance.GAS AND REGULATOR• This barbecue can use either propane orbutane LPG bottled gas. If using butaneyou must change the regulator.• Propane cylinders will supply gas all yearround, even on cold winter days.• Butane cylinders will supply sufficient gasin summer. Butane gas must not be usedin colder temperatures. Contact your localgas supplier for advice.• The cylinder should be positionedunderneath the main barbecue body andstored upright.• Gas cylinders should never be stored orlaid on their side.User InstructionsBefore assembling your barbecue, removeall protective packaging from each part.The gas cylinder must have a connectioncompatible with the regulator supplied withthe barbecue and have a minimum capacityof 4kg / 9lbs.Do not store a spare LP gas cylinder underor near this appliance.Never fill the cylinder beyond 80% full.Failure to follow these instructions exactlymay result in fire causing serious injury ordeath.Place dust cap on cylinder valve outletwhenever the cylinder is not in use. Onlyinstall the type of dust cap on the cylindervalve outlet that is provided with thecylinder valve. Other types of caps or plugsmay result in leakage of propane.Connecting to the Cylinder• Confirm all barbecue control knobs are inthe ‘OFF’ position.• Connect the regulator to the gas cylinder,tighten it securely and proceed accordingto instructions below and the instructionsfrom the gas cylinder supplier.Pressure Regulator Kit with Hose Intendedfor LP Gas - Type 698Technical specifications:Inlet pressure: 0.3-16 barOutlet pressure: 2.75 KPaGuaranteed flow capacity: 2 kg/hInlet: .880 P.O.L.Outlet: 5/8" 18 UNF or G1/4 LEFTRegulator classification: Type "A"1. Use and typical installation• This gas pressure regulator kit with hoseis designed for use with devices withan operating pressure of 2,8 KPa and arequired flow rate no greater than (2 kg/h).Both values are clearly labelled on theregulator itself (1).• Intended use for this gas pressureregulator kit with hose, is for auxiliaryheating systems, LP gas heaters, and gasgrills.• This device can be used outdoors, but thepressure regulator must then be coveredand protected from moisture so that theoutlet (2) is kept dry and protected. Whenused outdoors, the pressure regulatorcover must be face-down.• To ensure optimum performance, theregulator outlet should not be blocked orobstructed in any way.• Never remove the gas cylinder during use.2. Mounting pressure regulator kitwith hoseA) On the device• Ensure that all valves on the device (3)are closed .• Attach the end of the hose (4) to the gasintake on the device: the intake shouldhave the correct connection.