Symbol Descriptionthere is no gas supply /off positionSymbol Descriptionthere is maximum gassupply / ignition settingthere is minimum gas sup-plyto show the position of theburnerDaily useWarning! Refer to Safetychapters.Ignition of the burnerAlways ignite the burner beforeyou place the pots or pans.To ignite the burner:1. Push the control knob and turn itanticlockwise to the maximum positionmarked with .2. Keep the control knob pushed for about5 sec. As a result thermocouple heatsup, and the safety device switches off. Ifyou do not push the knob, the gassupply is interrupted.3. When you light the flame, you canadjust it.If the burner does not ignite,after a few attempts, check if thecrown and its cap are in correctpositions.123451 Burner cap2 Burner crown3 Ignition candle4 Injector5 ThermocoupleWarning! Do not keep thecontrol knob pressed for morethan 15 seconds. If the burnerdoes not light after 15 seconds,release the control knob, turn itinto off position and wait for atleast 1 minute before trying tolight the burner again.ENGLISH 11