Clean the glass panel with water and soap.Dry the glass panel carefully.When the cleaning is completed, install theglass panel and the oven door. Do theabove steps in the opposite sequence.Make sure that you install the internal glasspanel in the seats correctly and in thecorrect sequence. The inner glass panel hasa symbol printed in the corner on one side.The symbol must face the outside of thedoor and the external glass panel.Replacing the lampPut a cloth on the bottom of the interior ofthe oven. It prevents damage to the lampglass cover and the cavity.Warning! Danger ofelectrocution! Disconnect the fusebefore you replace the lamp.The lamp and the lamp glasscover can be hot.1. Turn off the oven.2. Remove the fuses from the fuse box orturn off the circuit breaker.3. Turn the lamp glass covercounterclockwise to remove it.4. Clean the glass cover.5. Replace the oven light bulb with a 25W, 230 V (50 Hz), 300 °C heat resistantoven light bulb (connection type: E14).6. Install the glass cover.TroubleshootingWarning! Refer to Safetychapters.What to do if...Problem Possible cause RemedyThe oven does not heat up. The oven is deactivated. Activate the oven.The oven does not heat up. The fuse is blown. Make sure that the fuse isthe cause of the malfunction.If the fuse is blown againand again, contact a quali-fied electrician.ENGLISH 19