IKEA LAGAN Use & Care Manual
Also see for LAGAN: ManualManualManualManualUser manual
                         | |
Contents | 
11ENDOOR REMOVAL/REVERSAL INSTRUCTIONSIMPORTANTPlace door on padded surface toavoid damage.HingePinCenterHingeScrewsHingeHolePlugFigure 2Figure 35. Using a 5/16 in. socket, remove the3 screws from the top hinge, and sethinge aside (see Figure 1A).6. Using a 5/16 in. socket, unscrewthe center hinge pin. Open therefrigerator door 90º, by hand,remove the pin, and lift the door offthe bottom hinge pin.7. Using a T25 Torx Head screwdriver,remove the 3 center hinge screws,and set center hinge aside (seeFigure 2).8. By hand, remove the bottom hingecover from both sides (open on thesides and pull up).9. Using a T20 Torx Head screwdriver,remove the door stopper screw, andremove door stopper (see Figure 3).10. Using a 5/16 in. socket, unscrew thebottom hinge pin (see Figure 3).11. Reinstall the bottom hinge pin in theleft side hole on the left side hinge(see Figure 3).12. Flip the door stopper. Reinstall thedoor stopper on top of the bottomhinge with the screw (see Figure 3).A BFigure 413. Install the bottom hinge covers.14. Using a putty knife gently removethe 3 center hinge hole covers (seeFigure 4A) and install on the oppositeside of the cabinet (see Figure 4B).ABFigure 515. With a flathead screwdriver, pry outthe center hinge bearing from thetop of the refrigerator door (seeFigure 5A).16. With a flathead screwdriver, pry outthe center hinge bearing plug fromthe opposite side of the refrigeratordoor (see Figure 5B).NOTEKeep the screws so they can be usedon the opposite side.17. Reinstall the center hinge bearing inplace of the plug removed in previ-ous step. Using a hammer, gently tapit all the way in.18. By hand, reinstall the center hingebearing plug on the opposite side ofthe door. |
Related manuals for IKEA LAGAN
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine