Heat-up indicatorWhen you activate an oven function, thebars in the display come on one by one.The bars show that the oven temperatureincreases or decreases.Clock functionsClock functions tableClock function ApplicationTIME OF DAY To set, change or check the time of day. Refer to "Set-ting the time".MINUTE MINDER Use to set a countdown time (maximum 23 h 59 min).This function has no effect on the operation of the ap-pliance. You can set the MINUTE MINDER at any time,also if the appliance is off.DURATION To set how long the appliance operates. Use only whenan oven function is set.END To set when the appliance must deactivate. Use onlywhen an oven function is set. You can use Duration andEnd at the same time (time delay), if the appliance is tobe activate and deactivate automatically later.Press again and again toswitch between the clockfunctions.To confirm the settings of theclock functions, press or wait 5seconds for an automaticconfirmation.Setting the DURATION or END functionduring cooking function1. Press again and again until thedisplay shows or .or flashes in the display.2. Press or to the set the values andpress to confirm.For Duration first you set the minutesand then the hours, for End first you setthe hours and then the minutes.An acoustic signal sounds for 2 minutesafter the time ends. or symbol andtime setting flash in the display. The ovenstops.3. Press any button or open the oven doorto stop the acoustic signal.If you press when you set thehours for DURATION , theappliance goes to setting of theEND function.ENGLISH 13