General Safety• Only a qualified person must install this appliance and re-place the cable.• Internally the appliance becomes hot when in operation. Donot touch the heating elements that are in the appliance. Al-ways use oven gloves to remove or put in accessories orovenware.• Do not use a steam cleaner to clean the appliance.• Before maintenance cut the power supply.• Do not use harsh abrasive cleaners or sharp metal scrapersto clean the glass door since they can scratch the surface,which may result in shattering of the glass.• Only use the core temperature sensor recommended for thisappliance.• To remove the shelf supports first pull the front of the shelfsupport and then the rear end away from the side walls. In-stall the shelf supports in the opposite sequence.• If the supply cord is damaged, it must be replaced by themanufacturer, an authorized Service or similarly qualifiedpersons in order to avoid a hazard.• Ensure that the appliance is switched off before replacing thelamp to avoid the possibility of electric shock.Safety instructionsInstallationWarning! Only a qualified person mustinstall this appliance.• Remove all the packaging.• Do not install or use a damaged appli-ance.• Obey the installation instruction suppliedwith the appliance.• Always be careful when you move theappliance because it is heavy. Alwayswear safety gloves.• Do not pull the appliance by the handle.• Make sure that the appliance is installedbelow and adjacent safe structures.• The sides of the appliance must stay ad-jacent to appliances or to units with thesame height.Electrical connectionWarning! Risk of fire and electricalshock.• All electrical connections should be madeby a qualified electrician.• The appliance must be earthed.ENGLISH 5