IKEA TILLREDA Installation Instructions Manual

Also see for TILLREDA: Manual Manual Manual Manual Manual

Contents

IKEA TILLREDA Installation Instructions Manual Manual pdf 19 page image

19ENGLISHSwitching onInsert the plug into the wall socket. Turnthe temperature regulator clockwise to amedium setting.When operating the refrigerator for the fi rsttime, run it without loading any food untilit autos tops at the desired temperature.Usually it takes 2 or 3hours,then set thethermostatic dial at the setting desired andput foods in the refrigerator.Switching offTo turn off the appliance, turn thetemperature regulator to the "OFF" position.Temperature regulationThe temperature is automatically regulated.To operate the appliance, proceed as follows:• turn the temperature regulator towardlower settings to obtain the minimumcoldness.• turn the temperature regulator towardhigher settings to obtain the maximumcoldness.A medium setting is generally the mostsuitable.However, the exact setting should be chosenkeeping in mind that the temperature insidethe appliance depends on:• room temperature• how often the door is opened• the quantity of food stored• the location of the appliance.Important! If the ambient temperature ishigh or the appliance is fully loaded, and theappliance is set to the lowest temperatures,it may run continuously causing frost toform on the rear wall. In this case the dialmust be set to a higher temperature toallow automatic defrosting and thereforereduced energy consumption.OperationCleaning the interiorBefore using the appliance for the first time,wash the interior and all internal accessorieswith lukewarm water and same neutral soapso as to remove the typical smell of a brand-new product, then dry thoroughly.Important! Do not use detergents orabrasive powders, as these will damage thefi nish.First UseAccessoriesDefrosting trayTemperature indicatorDaily Use