© Copyright LOTRONIC 2013 Page 1LLEEDD PPaarrttyy LLiigghhttJJDDLL001100BB//RR--LLEEDDUSER MANUALSAFETY INSTRUCTIONS• Keep this device away from rain and moisture!• Never look directly into the light source, as sensitive persons may suffer an epileptic shock(specially meant for epileptics)!• Indoors use only.• Keep away from children and animals.• Make sure that the available voltage is not higher than stated at the end of this manual.• Make sure the power cord is never crimped or damaged. If it is damaged, ask your dealer orauthorized agent to replace the power cord.• Always disconnect from the mains, when the device is not in use or before cleaning it. Onlyhandle the power cord by plug. Never pull out the plug by tugging the power cord.• DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnectdevice, the disconnect device shall remain readily operable.OPERATION• Plug the DC plug of the mains adaptor into the party light and the other end into a suitable mainsoutlet that delivers a voltage of 220-240Vac 50/60Hz. The light will immediately start working.TECHNICAL SPECIFICATIONSModel: LED Party LightPower supply: 220-240Vac 50/60Hz via AC12V/500mA adaptorElectric products must not be put into household waste. Please bring them to a recyclingcentre. Ask your local authorities or your dealer about the way to proceed.Imported from China byLOTRONIC SAAvenue Zénobe Gramme 91480 SAINTESBelgiumGB