N I - 7 0 7 5 2 5 H O M E P L U G A D A P T E R S TA R T E R K I T 2 0 0 M B P S22 S A F E T Y C A U T I O N SThis device is used for connection to the AC Homeplug. Before using the device, read theinstructions carefully, in order to use the device correctly and safely. For installationinstructions, refer to the installation section of this guide. Follow all the warnings and instructions marked on the product. Before cleaning the device, unplug it from the wall outlet. Use a dry cloth forcleaning. Do not use liquid cleaners or aerosol cleaners. Do not place the device near water. Do not place the device near or over a radiator or heat register. Do not use an extension cord between the device and the AC power source. Only professional technicians should service the device. Opening or removing coversmay result in exposure to dangerous voltage points or other risks. Unplug the device from the wall outlet and refer to professional service personnel forthe following conditions:– If liquid has been spilled into the product– If the device has been exposed to rain or water– If the device does not operate normally when following the operationinstructions– If the device exhibits a distinct change in performance3 A D A P T E R3.1 Ethernet InterfaceUse one end of a network cable to connect the Ethernet interface. Use the other end of thecable to connect the Ethernet interface of the computer or another Ethernet-enablednetwork device.