Icom IC-7300 Basic Manual
Also see for IC-7300: Reference manualFull manualService manualBasic ManualQUICK START OPERATING GUIDE
                                                                        | |
Contents
| 
3 BASIC OPERATION3-5Setting the frequency (Continued)Entering the Split Frequency Offset1. Touch the MHz digits.(Example: 14)Entering a Memory channel1. Touch V/M to select the Memory mode.VFO mode(Example: VFO A)Memory mode(Example: Memory channel 1)V/M• Opens the BAND STACKING REGISTER screen.2. Touch [F-INP].BAND STACKING REGISTER screen• Opens the F-INP screen.3. Enter the Split Frequency Offset.LIf you want the minus shift direction, touch [•(−)].L Enter the offset between −9.999 MHz and +9.999MHz (1 kHz steps).4. To save the entry, touch [SPLIT] or [−SPLIT].• Closes the F-INP screen.Entry examples• 10 kHz: [1], [0], [SPLIT]• −1.025 MHz: [•(−)], [1], [0], [2], [5], [−SPLIT]L After entering, the Split function is automatically turnedON.2. Touch the MHz digits.(Example: 14)• Opens the BAND STACKING REGISTER screen.3. Touch [F-INP].• Opens the F-INP screen.4. Enter a Memory channel number between 1 and99. (Memory channel 5)L If you want to set the Program Channel number (P1or P2), enter “100” for P1, and “101” for P2.BAND STACKING REGISTER screen5. Touch [MEMO] to select the entered channel.• Closes the F-INP screen.D Band Edge BeepYou will hear a Band Edge Beep and will bedisplayed when you tune into or out of an amateurband’s frequency range.L You can change the Band Edge Beep settings in thefollowing menu.MENU » SET > Function > Band Edge Beep[SPLIT] or[-SPLIT] isdisplayedTouch for -SplitF-INP screenF-INP screen |
Related manuals for Icom IC-7300
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine