Icom IC-A210 Instruction Manual

Also see for IC-A210: Price list Instruction manual Installation guide Instruction manual Service manual

Icom IC-A210 Instruction Manual Manual pdf 17 page image

133MEMORY OPERATION03■ Regular memory channelThe transceiver has 10 regular memor y channels. 5programming options are selectable.The following functions are available.REPLACE, DELETE, REVIVE and CHANNEL NAME EDITfunctions.q Push [RCL] to enter the memory mode.• The channel number appears.• The memory channel name also appears if it has been entered.w Rotate [O-DIAL] to select the regular memory channel.• “MEMORY” appears.e Rotate [DIAL] to select a desired channel.r Push [MEM], then rotate [O-DIAL] to select a menu op-tion as follow.• The memory channel number blinks.t Push [MEM] to perform the selected action.■ Group memory channelThe transceiver has 200 group memory channels comprisedof 10 channels in each of 20 groups.The following functions are available.REPLACE, DELETE, REVIVE GROUP NAME EDIT andCHANNEL TAG functions.q Push [RCL] to enter the memory mode.• The channel number appears.• The memory channel name also appears if it has been entered.w Rotate [O-DIAL] to select the group memory channel number.• A group number “GRP01–GRP20” appears.e Push [DIAL], and then rotate [O-DIAL] to select thememory group from GRP01 to GRP20 if necessary.• The group and channel numbers blink.• Push [DIAL] again, or push [RCL] to set the memory group.r Rotate [DIAL] to select a desired channel within the se-lected group.t Push [MEM], rotate [O-DIAL] to select a menu as follows.• The memory channel number blinks.y Push [MEM] to perform the selected action.CH01127.00 5122.00RX GRP01CH01127.00 5122.00RX MEMORYREPLACE Replace to the standby frequency.DELETE Delete the memory channel.REVIVE Revive the previous memory channel data.CH NAME Edit the memory channel name.DONE Do nothing and return to the memory mode.REPLACE Replace to the standby frequency.DELETE Delete the memory channel.REVIVE Revive the previous memory channel data.GRP NAME Edit the group name.CH TAG Set the memory channel as a tag channel.DONE Do nothing and return to the memory mode.