Icom IC-A220 Instruction Manual

Also see for IC-A220: Service manual Instruction manual Installation guide Installation manual Installation guide

■ General descriptionThe flow chart below shows the basic operating procedures.You need to set the frequency, activate the frequency, andreceive or transmit.There are two ways to set the frequency. See page 5 and 6for details.• Set the frequency normally • Set the frequency directlySet the frequency normallySet the frequency which will be used for the next operatingfrequency in the standby frequency display. Then exchangethe active frequency for the standby frequency.Set the frequency directlyYou can directly set the frequency.See ‘Directly setting the frequency.‘42BASIC OPERATION0102TIP: For quick frequency setting, you can enter often-used frequencies into memory channels. See “MEMORYOPERATION” for details. (pp. 7–12)When you recall a memory channel, the previous standbyfrequency is over written.Set the standby frequency.Activate the frequency.Enter the direct frequencysetting mode.Set the operating frequency.Receive/transmit