Icom IC-A24 Instruction Manual

Also see for IC-A6: Price list Specification sheet Instruction manual Instruction manual Service manual

Icom IC-A24 Instruction Manual Manual pdf 21 page image

165SCAN OPERATION■ Scan typesThe U.S.A. version has 3 scan types to suit your needs. Thenon-U.S.A. versions have 2 scan types.■ COM band scanq Push [CLR•DEL] to select the frequency mode.w Push [SQL•WX-ALERT], then rotate [DIAL] to set thesquelch level to the point where noise is just muted.e Push , then push [ANL•SCAN] to start the scan.• When a signal is received, the scan pauses until it disappears.• To change the scanning direction, rotate [DIAL].r To stop the scan, push [CLR•DEL].■ Memory scanq Push [MR•MW] to select the memory mode.• Push , then push [0•BANK], and rotate [DIAL] to select theBANK number, if desired. Push [CLR•DEL] to exit the BANK se-lection mode.w Push [SQL•WX-ALERT], then rotate [DIAL] to set thesquelch level to the point where noise is just muted.e Push , then push [ANL•SCAN] to start the scan.• When a signal is received, the scan pauses until it disappears.• To change the scanning direction, rotate [DIAL].r To stop the scan, push [CLR•DEL].NOTE: Program 2 or more memory channels to start thememory scan.WEATHER CHANNEL SCANRepeatedly scans all “TAG” weather channels. Weatherchannels are available in the U.S.A. version only.MEMORY SCANRepeatedly scans allselected memory bank’s“TAG” memor y chan-nels. Used for checkingoften-used channelsand bypassing usuallybusy channels such ascontrol-tower frequen-cies.COM BAND SCANRepeatedly scansa l l f r e q u e n c i e sove r t h e e n t i r eCOM band.108.00MHzScanJump118.00MHz136.975MHznon-TAGchannelnon-TAG channelMch 2 Mch 4 Mch 6Mch 7Mch 1Mch 8Mch 10Mch 1945