Icom IC-A24E Instruction Manual

Also see for IC-A24E: Service manual Service manual Instruction manual Instruction manual

267 BATTERY PACKSD Regular chargingq Attach the battery pack to the transceiver.w Be sure to turn the transceiver power OFF.e Connect the Wall charger or optional cable (CP-20) asshown below.r Charging the battery pack approx. 8 hours, depending onthe remaining power condition.DO NOT charge BP-210N more than 12 hours. Otherwise,BP-210N will be damaged. BP-210N must be charged for8–12 hours only. Optional battery caseWhen using a battery case attached to the transceiver, install6 × AA (LR6) size Alkaline batteries as illustrated below.q Remove the battery case from the transceiver.w Install 6 × AA (LR6) size Alkaline batteries.• Be sure to observe the correct polarity.CAUTION:• When installing batteries, make sure they are all the samebrand, type and capacity. Also, do not mix new and oldbatteries together.• Keep battery contacts clean. It’s a good idea to clean bat-tery terminals once a week.Wall chargerTo [DC 11V]IC-A24E/A6E with theattached battery packCP-20 (for 11 24 V)(optional)To the cigarettelighter socketTurn power OFFR CAUTION !• DO NOT modify the CP-20. A modifica-tion could cause a fire or electrocution.• BE CAREFUL not to cut or fray theCP-20’s power cable when disconnect-ing/connecting the CP-20 from/to thecigarette lighter socket.