Icom IC-F1000 Series Operating Manual

Also see for IC-F1000 series: Instructions Operating guide Instructions Instructions Instructions

Contents

Icom IC-F1000 Series Operating Manual Manual pdf 21 page image

1821615141312111098765431BASIC OPERATION 2■ Setting the Ringer levelThese instructions are for the non-display type transceivers.The Ringer level can be adjusted between 1 and 5, or 1(Linked) and 5 (Linked). When a Linked option is selected,the ringer audio level is adjustable by rotating [VOL].Rotateq [VOL] to turn OFF the transceiver power.Setw [ROTARY SELECTOR] to Channel 16.While holding downe [Lower], rotate [VOL] to turn ON thepower and enter the Ringer level adjustment mode.Pushr [Upper] to increase, or push [Lower] to decreasethe Ringer level.• Repeatedly pushing [Upper] first selects 1 (lowest) to 5(highest), and then selects the lowest linked level, 1 (Linked) tothe highest, 5 (Linked). Repeatedly pushing [Upper] or [Lower]repeats the cycle. See the illustration on the right.• The adjustable range is 1 to 5 or 1 (Linked) to 5 (Linked).• A beep sounds after pushing [Upper]. Therefore, you candetermine the current level setting by the increasing loudnessof the beep that sounds.• To determine if you have selected a linked level, set [VOL]to minimum, then push [Upper] up to 10 times, listening forthe loudest beep (level 5). Pushing [Upper] once after theloudest beep will select 1 (Linked). Repeatedly push [Upper]or [Lower] to select the desired linked level.Rotatet [VOL] to turn OFF the power to exit the Ringerlevel adjustment mode.NOTE:This operation may not be selectable, depending on thepresetting. Ask your dealer for details.254315 (Linked)4 (Linked)3 (Linked)2 (Linked)1 (Linked)Pushing[Lower]Pushing[Upper][ROTARY SELECTOR][VOL][Upper][Lower]