Icom IC-F111 Instruction Manual

Also see for IC-F121: Price list Service manual Instruction manual

Contents

Icom IC-F111 Instruction Manual Manual pdf 10 page image

■ Turning power ONq Push [ ] to turn the power ON.w If the transceiver is programmed for a start up passcode,input the digit codes as directed by your dealer.• The keys in the table below can be used for password input.• The transceiver detects numbers in the same block as identi-cal. Therefore “01234” and “56789” are same.e When the “PASSWORD” indication does not clear after in-putting 4 digits, the input code number is incorrect. In thiscase, turn the power off and start over.■ Channel selectionSeveral types of channel selection are available. The meth-ods may differ according to your system setup.NON-BANK TYPE:Push [ ]/[ ] to select the desired operating channel in se-quence; or, push one of the [CH 1] to [CH 4] keys to select achannel directly.BANK-TYPE:Push [BANK] to select the desired bank number or name.AUTOMATIC SCAN TYPE:Channel setting is not necessary for this type. When turningthe power ON, the transceiver automatically starts scanning.Scanning stops when receiving a call or when taking the mi-crophone off hook.KEYNUMBER 0 1 2 3 45 6 7 8 972 OPERATION