Icom IC-F3022T/S Instruction Manual

Also see for IC-F3022S: Service manual Service manual addendum Service manual Instruction manual Instruction manual

Icom IC-F3022T/S Instruction Manual Manual pdf 16 page image

123 BASIC OPERATIOND TX code channel selectionIf the transceiver has [TX Code CH Select] assigned to it, theindication can be switched between the operating channelnumber (or name) and TX code channel number (or name).When the TX code channel number (or name) is displayed,[CH Up] or [CH Down] selects the TX code channel.USING [TX CODE CH SELECT] KEY:q Push [TX Code CH Select]— a TX code channel number(or name) appears.w Push [CH Up] or [CH Down] to select the desired TX codechannel.e After selecting, push [TX Code CH Select] to set.• Return to the stand-by mode.r Push [Call] to transmit the selected TX code.USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:If the transceiver has [TX Code CH Up] or [TX Code CHDown] assignment, the programmed TX code channel canbe selected directly when pushed.D TX code number editIf the transceiver has [TX Code CH Select] or [TX CodeEnter] assigned to it, TX code contents can be edited withinthe allowable digits.USING [TX CODE CH SELECT] KEY:q Push [TX Code CH Select] to enter the TX code channelselection mode.• Select the desired channel with [CH Up] or [CH Down] if neces-sary.w Push and hold [TX Code CH Select] for 1 sec. to enterthe TX code edit mode.e Push [TX Code CH Select] several times to select the de-sired digit to be edited.• The digit to be edited blinks.r Push [CH Up], [CH Down] or 10-keypad* to set the de-sired digit.t Push [TX Code CH Select] to set the digit. The digit to theright will blink automatically.• When the 10-keypad* is used for setting, the digit to be edited movesto the right automatically without pushing [TX Code CH Select].y Repeat r and t to input all allowable digits.u After setting the last digit, push [TX Code CH Select] toset the code and return to the stand-by mode.