Icom IC-F3061T Instruction Manual

Also see for IC-F3061S: Adjustment Servise manual Instruction manual Service manual Service manual

Icom IC-F3061T Instruction Manual Manual pdf 20 page image

165 CONVENTIONAL OPERATIOND Talkgroup ID code selectionIf the transceiver has [Talkgroup] assigned to it, the indica-tion can be toggled between the operating channel name(and the channel number)* and the Talkgroup ID name (orID code if the ID name is not programmed.) When the Talk-group ID name (or ID code) is displayed, [CH Up] or [CHDown] selects the desired Talkgroup ID name (or ID code).q Push [Talkgroup]— Talkgroup ID name (or ID code) ap-pears.w Push [CH Up] or [CH Down] to select the desired Talk-group ID name (or ID code).e Push [PTT] to transmit the selected Talkgroup ID.D TX Status message selectionIf the transceiver has [TX Status] assigned to it, the indica-tion can be toggled between the operating channel name(and the channel number)* and the Status message (and theStatus channel.)* When the Status message (and the Statuschannel)* is displayed, [CH Up] or [CH Down] selects thedesired Status message.q Push [TX Status]— Status message (and Status chan-nel)* appears.w Push [CH Up] or [CH Down] to select the desired Statusmessage.e Push [PTT] to transmit the selected Status message.* Only when the 2 lines indication mode is selected.■ User set modeUser set mode is accessed at power ON and allows you toset seldom-changed settings. In this case you can “custom-ize” the transceiver operation to suit your preferences andoperating style.Entering the user set mode:q While pushing and holding [P1] and [P2], rotate [VOL]to turn the power ON. Then, push and hold [P0] to enteruser set mode.w Push [P0] several times to select the appropriate item.Then push [Side2] or [Side3] to set the desired level/con-dition.• Available set mode functions are Backlight, LCD contrast,Beep, Beep Level, Ringer Level, SQL Level, AF Min Level,Mic Gain, VOX Gain, VOX Delay, Battery Voltage and SignalMoni.e Rotate [VOL] to turn the power OFF to exit user set mode.NOTE: User set mode is also available via a programma-ble key. Please refer to (p. 9) [User Set Mode] section.