Icom IC-F3061T/S Instruction Manual

Also see for IC-F3061S: Adjustment Servise manual Service manual Instruction manual Service manual

Icom IC-F3061T/S Instruction Manual Manual pdf 14 page image

■ Turning power ONPrior to using the transceiver for the first time, the batterypack must be fully charged for optimum life and operation.((☞p. 20))q Rotate [VOL] to turn the power ON.w If the transceiver is programmed for a start up password,input the digit codes as directed by your dealer.• 10-keypad can be used for password input depending on ver-sion:• The keys in the table below can be used for password input:• The transceiver detects numbers in the same block as identical.Therefore “01234” and “56789” are the same.e When the “PASSWORD” indication does not clear afterinputting 4 digits, the input code number may be incorrect.Turn the power off and start over in this case.D Battery type selectionThe battery type must be selected according to the attachingbattery type when tuning the transceiver ON..➥ While pushing and holding [Emer] and [PTT], rotate [VOL]to toggle the attaching battery type.• After the display appears, release [Emer] and [PTT].• “DRY BATT” is displayed for about 3 sec. then “Lo” appearswhen the battery case operation is selected.• “LI-ION” is displayed for about 3 sec. when the Lithium-ion bat-tery operation is selected.• This operation may not be available depending on the pre-setting.Ask your dealer for details.KEYNUMBER 0549382716(Side3)103 BASIC OPERATION