 Channel selectionSeveral types are available, and the channel selectionmethod may differ according to your system set up.NON-BANK TYPE:Push the [ ]/[ ] keys to select the desired operatingchannel, in sequence; or,push one of the [CH 1] to [CH 4] keys to select these channelsdirectly.Select indicator LED lights when CH5 to CH8 is selected.(PMR 8CH model)BANK-TYPE: (PMR)Push [BANK] to select the desired bank number.Select indicator LED lights when bank 2 is selected.AUTOMATIC SCAN TYPE:Channel setting is not necessary for this type. When turningthe power ON, the transceiver automatically starts scanning.Scanning stops when receiving a call or when taking the mi-crophone off hook.SS Turning power ONq Push [KI ] to turn the power ON.w If the transceiver is programmed for a start up passcode,input digit codes as directed by your System operator.• The keys in the diagram below can be used for password input:• The transceiver detects numbers in the same block as identical.Therefore “1234” and “6789” are the same.e When all channel indicator LEDs still blink after inputting 4digits, the input code number may be incorrect. Turnpower off and start over in this case.OPERATION 26KEYNUMBERP 0 P 1 P 2 P 305 16 27 38 49

Front panel

Function LED

Programmable function keys

panel description

Turning power ON

Receiving and transmitting

D DTMF transmission

Rear panel and connection

Supplied accessories

Mounting the transceiver

Optional OPC-617 installation

SmarTrunk II™ and conventional modes

last number redial

OPTIONS

Icom IC-F310S Instruction Manual

receiver circuits

transmitter circuits

pll circuits

power supply circuits

pll adjustment

front unit

main unit

IC-F310S

IC-F320S

IC-F410S

IC-F420S