32 BIIS 1200 OPERATION■ Setting exampleThe followng key functons are recommended to be as-sgned to each programmable key for the BIIS 1200 opera-ton. The key functon can be assgned by your dealer. Askyour dealer for detals.NOTE: Durng BIIS 1200 operaton, MDC 1200 system,LTR®, and IDAS operatons are not avalable.[Call] : Push to transmt a BIIS call when the se-lected channel s an MSK channel.• “CALL” s dsplayed on the key ndcator.[BIIS Button] : Push to select the call lst ID/transmtmessage, or push to dsplay the recevemessage record for selecton.• “BIIS” s dsplayed on the key ndcator.When ths key s pushed, “BIIS” s nvertedas “ ”.[TX Code Enter] : Push to enter the ID code edt mode d-rectly.• “TXCE” s dsplayed on the key ndcator.[Moni(Audi)] : Push ths key after the communcaton tosend a ‘Clear down’ sgnal durng MSKchannel operaton.[CH Up]/[Down] : Durng stand-by operaton, push to selectthe operatng channel.After pushng [BIIS Button] or [TX CodeCH Enter], push to select call lst or TXcode channel, respectvely.■ Receiving a callD Individual callq When an ndvdual call s receved;• Beeps sound.• “ ” appears and the mute s released.• The programmed text message (e.g.“CALLING”) and the call-ng staton ID (or text) s dsplayed when the ndcaton mode s2 lnes.• The programmed text message (e.g.“CALLING”) and the call-ng staton ID (or text) s dsplayed alternately when the ndca-ton mode s 1 lne, dependng on the settng.• “ ” appears or blnks dependng on the settng.12341111TXCECALL BIIS TXCCalling station IDOwn IDAppears Appears orblinksw Push and hold [PTT], then speak nto the mcrophone ata normal voce level.• TX ndcator lghts red.e Release [PTT] to return to receve.• BUSY ndcator lghts green whle recevng a sgnal.r To finsh the conversaton, push [Moni(Audi)] to send the‘Clear down’ sgnal.• Ether staton can send a ‘Clear down’ sgnal.• “CLR DOWN” s dsplayed for 2 sec. (approx.).• “ ” dsappears and the transcever returns to stand-by opera-ton.