Icom IC-F3161DT Instruction Manual

Also see for IC-F3161DS: Adjustment Instruction manual

Icom IC-F3161DT Instruction Manual Manual pdf 11 page image

62PANEL DESCRIPTION12345678910111213141516y BELL INDICATORAppears/blinks when the matched signal is received, ac-cording to the pre-programming.u CALL CODE MEMORY INDICATORAppears when the call code memory is selected.i BATTERY INDICATORAppears or blinks when the battery power decreases to aspecified level.IndicationFull Middle Chargingrequired No batteryBattery levelblinks when the battery is exhausted.blinks when the battery is over charged.o ALPHANUMERIC DISPLAY➥ Displays an operating channel number, channel name,Set mode contents, DTMF code, etc.➥ The indication mode can be selected from 1 line or 2lines. Ask your dealer for details.• In this instruction manual, the LCD illustration is describedusing the 2 lines indication mode.!0 KEY INDICATORIndicate the programmed function of the front panel keys([P0], [P1], [P2] and [P3]).■ Programmable function keysThe following functions can be assigned to [EMR], [Side1],[Side2], [Side3], [P0], [P1], [P2] and [P3] programmablefunction keys.Consult your Icom dealer or system operator for details con-cerning your transceivers programming.If the programmable function names are bracketed in the fol-lowing explanations, the specific key is used to activate thefunction depends on the programming.CH UP AND DOWN KEYS “UP” “DOWN”➥ Push to select an operating channel. When [Rotary selec-tor] selects “operating channel,” this key is not available.➥ Push to select a transmit code channel after pushing[TX Code CH Select].➥ Push to select a DTMF channel after pushing [DTMF Au-todial].➥ Push to select a scan group after pushing and holding[Scan].➥ Push to select the desired application type, individual/talk-group ID, TX status message and SDM (Short Data Mes-sage) after pushing [Digital Button].