Icom IC-F3162DT Instruction Manual

Also see for IC-F3162DS: Insrtuction manual Operating guide Instruction manual Instruction manual

Icom IC-F3162DT Instruction Manual Manual pdf 20 page image

153 BASIC OPERATIOND TX code edit (5-tone operation only)If the transceiver has a key assigned to TX Code CH Selector TX Code Enter, TX code contents can be edited within theallowable digits.USING [TX CODE CH SELECT]:q Push [TX Code CH Select] to enter the TX code channelselection mode.• Select the desired channel before entering the TX code channelselection mode, if necessary.w Hold down [TX Code CH Select] for 1 second to enter theTX code edit mode.• The digit to be edited blinks.e Push [TX Code CH Select] to select the desired digit to beedited.r Push [CH Up] or [CH Down] to select the desired digit.t Push [TX Code CH Select] to set. The digit to the right willautomatically blink.y Repeat r and t to edit all allowable digits.u After editing, push [TX Code CH Select] to set.• Return to the stand-by mode.i Push [Call] to transmit.USING [TX CODE ENTER]:q After pushing [TX Code CH Select], push [CH Up] or [CHDown], or push [TX Code CH Up] or [TX Code CH Down]to select the desired TX code channel.w Push [TX Code Enter] to enter the TX code edit mode.• The digit to be edited blinks.e Push [TX Code Enter] to select the desired digit to be ed-ited.r Push [CH Up] or [CH Down] to select the desired digit.t Push [TX Code Enter] to set. The digit to the right will au-tomatically blink.y Repeat r and t to edit all allowable digits.u After editing, push [TX Code Enter] to set.• Return to the stand-by mode.i Push [Call] to transmit.D DTMF transmissionIf the transceiver has a key assigned for DTMF Autodial, theautomatic DTMF transmission function is available. Up to 8DTMF channels are selectable.q Push [DTMF Autodial]— a DTMF channel appears.w Push [CH Up] or [CH Down] to select the desired DTMFchannel.e Push [DTMF Autodial] to transmit the DTMF code.