Icom IC-F3210D Operating Manual

Also see for IC-F3210D Series: Operating guide Instruction manual Service manual

Contents

Icom IC-F3210D Operating Manual Manual pdf 29 page image

272IDAS OPERATION12345678910111213141516Position data transmission■When a GPS receiver is connected to the transceiver, the lon-gitude and latitude position data can be automatically trans-mitted when:• A GPS request status message is received• After sending a voice message- Set the ‘Send with Login’ and ‘Send with Logoff’ items to‘Enable.’• After sending a status message- Set the ‘Send with Status Call’ item to ‘Enable.’• After sending a message- Set the ‘Send with SDM Call’ item to ‘Enable.’• After sending a Call Alert- Set the ‘Send with Call Alert’ item to ‘Enable.’• After sending an Emergency call- Set the ‘Send with Emergency’ item to ‘Enable.’Ask your dealer or system operator for a GPS receiver con-nection details.Status message transmission■The status message can be automatically transmitted.The status message is transmitted when:• The transceiver is turned ON or OFF- Set the status message to be transmitted in ‘Power ON Status’ or‘Power OFF Status’ item, respectively.- Set the target station ID in ‘Power Status ID,’ ‘Power Status ID forSingle-site Trunk’ or ‘Power Status ID for Multi-site Trunk.’• After sending a voice message- Set the ‘Send with Voice Call’ item to ‘Enable.’- Set the status message to be transmitted in ‘Send Status Num-ber’ item.Encryption function■The encryption function enables voice scrambling, which pro-vides private digital communication between stations.Push [Encryption] to turn the Encryption function ON or➥OFF.• “ ” (For the IC-F3230D/F4230D series transceivers) or “ ”(For the IC-F5220D/F6220D series transceivers) appears whenthe Encryption function is ON.

/ 32

Related manuals for Icom IC-F3210D Series