Icom IC-F3262DT Instruction Manual

Also see for IC-F3262DS: Operating guide Instruction manual

Icom IC-F3262DT Instruction Manual Manual pdf 17 page image

123BASIC OPERATIONChannel selection■Several types of channel selections are available. Methodsmay differ, depending on the presetting.NON-ZONE TYPE:To select the desired operating channel:• Push [CH Up] or [CH Down].• Rotate [ROTARY SELECTOR]*.- Up to 16 preprogrammed channels can be selected.• Push one of [MR-CH 1] to [MR-CH 4].ZONE TYPE:To select the desired zone:• Push [Zone], then push [CH Up] or [CH Down].• Push [Zone Up] or [Zone Down].• Rotate [ROTARY SELECTOR]*.- Up to 16 preprogrammed zones can be selected.* Depending on the presetting.When [ROTARY SELECTOR] selects “Operating channel,” [CH Up]/[CH Down] are disabled.When [ROTARY SELECTOR] selects “Operating zone,” [Zone] or[Zone Up]/[Zone Down] are disabled.AUTOMATIC SCAN TYPE:Channel setting is not necessary for this type. When you turnON power, the transceiver automatically starts scanning.Scanning stops when a call is received.Voting operationD (for zone selection)The transceiver automatically starts scanning when a zone,specified for the voting operation, is selected.The voting scan detects the signal of the repeater and auto-matically selects the strongest station.12345678910111213141516