Icom IC-F3400D Operating Manual

Also see for IC-F3400D: Operating guide Instructions

Contents

Icom IC-F3400D Operating Manual Manual pdf 81 page image

7 NXDN™ OPERATION7-4Transmitting a call (Continued)D Transmitting a Group callYou can call a specified group.Portable: For the Ten-key and the Simple key typesMobile: For the LCD types(Menu > Signaling/Call > Call List Select)1. Push [Menu] to display the Menu screen.2. Push [Left] or [Right] to select “Signaling/Call,”then push [OK].3. Push [Up] or [Down] to select “Call List Select,”then push [OK].4. Push [Up] or [Down] to select the Group ID.5. Push [PTT] to transmit a Group call.6. Hold down [PTT] and speak at your normal voicelevel. Release [PTT] to receive.TIP:• You can transmit a Group call through the CallMenu. (Menu > Signaling/Call > Call menu)• When a Group ID is programmed in the MemoryCH, you can transmit the Talkgroup call by pushing[PTT] on the channel.Portable: For the Ten-key and the Simple key typesMobile: For the LCD typesUsing [Call List Select]:1. Push [Call List Select] to display the “Call ListSelect” screen.2. Push [Up] or [Down] to select the Group ID.3. Push [PTT] to transmit a Group call.4. Hold down [PTT] and speak at your normal voicelevel. Release [PTT] to receive.Using [Group]:1. Push [Group] to display the “Group Select”screen.2. Push [Up] or [Down] to select the Group ID.3. Push [PTT] to transmit a Group call.4. Hold down [PTT] and speak at your normal voicelevel. Release [PTT] to receive.TIP: You can display the “Group Select” screenthrough the Menu screen.(Menu > Signaling/Call > Group Select)