Icom IC-F4100D Series Instruction Manual

Also see for IC-F3100D series: Instruction manual

Icom IC-F4100D Series Instruction Manual Manual pdf 35 page image

264IDAS OPERATION1234567891011121314151617181920■ Receiving a callD Receiving a Call Alertq When a Call Alert is received;• The transceiver will automatically transmit the acknowledgement.• The LED indicator blinks orange.• Beeps sound.w Hold down [PTT], then speak into the microphone.e Release [PTT] to receive a response.NOTE: The LED indicator or Beeps may differ, depending on thepresetting. Ask your dealer for details.D Receiving a Stun, Kill or ReviveIf an individual call with Stun or Kill command is received (RANcode matching is not necessary depending on the presetting), thetransceiver will automatically transmit the acknowledgement, andthen you cannot receive* or transmit.* Depending on the received Stun command setting.➥ When a Stun command is received;• The transceiver cannot be operated until the individual call withRevive command is received (RAN code matching is not nec-essary depending on the presetting) or until the data cloning isperformed.• Even if [ROTARY SELECTOR] is changed, the transceiver willkeep the same channel as the Stun command is received.➥ When a Kill command is received;• The LED indicator alternately blinks red and green.• The transceiver cannot be operated until the data cloning isperformed. Ask your dealer for details.NOTE: Depending on the presetting, the transceiver ignores theStun, Revive and Kill commands, which are from a non-specifiedstation.