Icom IC-F4162DS Instruction Manual

Also see for IC-F3162DS: Insrtuction manual Operating guide Instruction manual Instruction manual

Icom IC-F4162DS Instruction Manual Manual pdf 21 page image

163BASIC OPERATION■ User set modeUser set mode is accessed at power ON and allows you to setseldom-changed settings. You can “customize” the transceiveroperation to suit your preferences and operating style.Entering the user set mode:q While pushing and holding [P1] and [P2], rotate [VOL] toturn the power ON.• Turn power OFF in advance.• “SET MODE” appears for 1 sec at power ON.w Push and hold [P0] to enter user set mode.e Push [P0] several times to select the appropriate item.Then push [Side2] or [Side3] to set the desired level/condi-tion.• Available set mode functions are Backlight, LCD contrast,Beep, Beep Level, Ringer Level, SQL Level, AF Min Level,Mic Gain, VOX Gain*, VOX Delay*, Battery Voltage, SignalMoni, Lone Worker and System Info.* Appears only when the external VOX unit is connected.r Push and hold [P0] again to exit set mode.User set mode is also available using a programmable key.Please refer to p. 10 [User Set Mode] section for instructionsregarding using the key assigned for user set mode.[User Set Mode] is allowed for the quick item selection. Set“Enable” for the often used items with the CS-F3160/F5060cloning software. Ask your dealer for details.NOTE: [Side2] or [Side3] and [P0] activate while in the userset mode regardless of the assigned key functions.■ Emergency transmissionWhen [Emergency] is pushed for the specified time period, anemergency signal is automatically transmitted. (p. 9)When [Emergency] is pushed for the specified time period,the DTMF or 5-tone* emergency signal is transmitted onceor repeatedly on the emergency channel. However, when noemergency channel is specified, the signal is transmitted onthe previously selected channel.If you want to cancel the emergency call, push and hold thekey again before transmitting the call.*Depending on the operating model type.■ Man Down Emergency CallThis function requires the optional UT-124R man down unitand can be performed in conventional mode.The man down emergency call function transmits an emer-gency call automatically when the transceiver has been left ina horizontal position.After the emergency call, the transceiver performs transmis-sion and reception alternately with receiving a signal and emit-ting audio.When the emergency reset signal is received, the function iscancelled.IMPORTANT: Set an emergency channel individually, toprovide certain emergency call operation is recommended.12345678910111213141516