Icom IC-F5062D Instructions Manual

Also see for IC-F5062D: Instruction manual Instruction manual Instruction manual Operating guide

Contents

receiving and transmitting

Icom IC-F5062D Instructions Manual Manual pdf 2 page image

– 2 – – 3 –FUNCTION DISPLAYTurning power ONDHold down [➥ ] to turn ON the power. NOTE: If the transceiver is programmed for a start uppassword, input the digit codes as directed by yourdealer. See the operating guide for details.BASIC OPERATIONq SIGNAL STRENGTH ICONDisplays relative receive signal strength level.Weak Receive Signal level Strongw LOW POWER ICONDisplayed when low output power is selected.e AUDIBLE ICON➥ Displayed when the channel is in the ‘Audible’(unmute) mode.➥ Displayed when a matching signal is received.r COMPANDER ICON➥ Displayed when the Compander function is activated.When the GPS indicator setting is ON*➥ Displayed when the GPS receiver acquires the GPSsignal from a satellite. In this case, the compandericon does not show the Compander function’s status.*Ask your dealer for details.t SCRAMBLER ICONDisplayed when the Voice Scrambler function is activated.y BELL ICONDisplayed or blinks when a matching signal is received,according to the presetting.u CALL CODE MEMORY ICONDisplayed when the call code memory is selected.i SCROLL ICONDisplayed when an SDM (Short Data Message),including more than 12 characters, is selected in thereceived message log screen by using [BIIS Button] or[dPMR Button].†, ‡o MESSAGE ICONDisplayed when an SDM or Status message is received. †, ‡!0 ALPHANUMERIC DISPLAY➥ Displays an operating channel number, channel name,User Set mode contents, DTMF code, etc.➥ Depending on the presetting, characters are displayedin 1 line or 2 lines on the LCD.• In the instruction manual, the LCD illustration is describedas having characters displayed in 2 lines.!1 ACTIVATED KEY ICONDisplayed above the key assigned as [Scan], [Scan Add/Del(Tag)], [Lock], [Talk Around], [Surveillance] and [BIISButton]†, while that key is activated.† BIIS operation only ‡ dPMR operation onlyReceiving and TransmittingDReceiving:Select a channel.qPush [CH Up] or [CH Down].➥Push one of the direct channel select keys,➥[MR-CH 1] to [MR-CH 4].When receiving a call, rotate [VOL] to adjust the audiowoutput level to a comfortable listening level.Transmitting:Wait until the channel is clear to avoid interference.Take the microphone off the hook.q• While scanning, the scan stops.Wait for the channel to become clear.w• The channel is busy when the LED indicator lights green.While holding down [PTT], speak at a normal voice level.eRelease [PTT] to receive.rIMPORTANT:To maximize the readability of your signal:1. After pushing [PTT], pause briefly before you startspeaking.2. Hold the microphone 5 to 10 cm (2 to 4 inches) fromyour mouth, then speak at a normal voice level.About the LED indicatorD• Lights red while transmitting.• Lights green while receiving a signal, or when the squelchis open.PANEL DESCRIPTIONMOUNTING THE TRANSCEIVERThe universal mounting bracket supplied with yourtransceiver allows under or overhead mounting.• Mount the transceiver securely with the 4 supplied screwsto a thick surface that can support more than 1.5 kg (3.3 lb).Flat washerFelt*Spring washerWhen using theself-tapping screwsFelt**The felt pads reduce vibration.[VOL]LED indicator Up/Down keysPower key [ ]Dealer-assignable keys*[P0], [P1], [P2], [P3], [P4]*Ask your dealer for details.Function display SpeakerMicrophoneconnectorAbout the Microphone connectorDConnect the supplied or optional microphone.NEVER connect non-specified microphones. The pinassignments may be different and may damage thetransceiver.D MICROPHONEThe supplied or optional microphone has a PTT switch anda hanger.• The following functions are available when you put themicrophone ON hook, or take it OFF hook (depending onthe presetting):- Automatic scan starts when you put it ON hook.- Scan is paused or cancelled when you take it OFFhook.- Automatically selects the Priority A channel when youtake it OFF hook.- Sets to the ‘Inaudible’ (mute) mode when you put it ONhook.- Sets to the ‘Audible’ (unmute) mode when you take itOFF hook.I c o m I n c .!1q w e r t y iu o!0A key element in the performance of any communicationsystems is the antenna. Contact your dealer for moreinformation regarding antennas and how to install them.ANTENNAFuses are installed in the supplied DC power cable. If a fuseblows, track down the source of the problem, repair it, andthen replace the damaged fuse with a new rated one.❑ Fuse rating: 20 AUSE only a 20 A fuse.FUSE REPLACEMENT

/ 2

Related manuals for Icom IC-F5062D