Icom IC-F51 Instruction Manual

Also see for IC-F51: Instruction manual Service manual Service manual addendum Service manual Instruction manual

Icom IC-F51 Instruction Manual Manual pdf 25 page image

D TX code number editIf the transceiver has [TX Code CH Select] or [TX Code Enter] as-signed to it, TX code contents can be edited within the allowabledigits.TO EDIT A TX CODE VIA [TX CODE CH SELECT] KEY:q Push [TX Code CH Select] to enter the TX code channel selec-tion mode.• Select the desired channel using [ ]/[ ] if necessary.w Push [TX Code CH Select] for 1 second to enter the TX codeedit mode.e Push [TX Code CH Select] to select the desired digit to be ed-ited.r Set the desired digit using [ ]/[ ]/[TX Code CH Up]/[TXCode CH Down].t Push [TX Code CH Select] to set the digit. The editable digit willmove to the right automatically.y Repeat r and t to input all allowable digits.u Push [Call] or [PTT] to transmit the selected TX code.TO EDIT A TX CODE VIA [TX CODE ENTER] KEY:q Select the desired TX code channel via [TX Code CH Up]/[TXCode CH Down].w Push [TX Code Enter] to enter the TX code edit mode.e Push [TX Code Enter] to select the desired digit to be edited.r Set the desired digit using [ ]/[ ]/[TX Code CH Up]/[TXCode CH Down].t Push [TX Code Enter] to set the digit. The editable digit willmove to the right automatically.y Repeat r and t to input all allowable digits.u Push [Call] or [PTT] to transmit the selected TX code.163CONVENTIONAL OPERATION1234567891011121314151617181920