Icom IC-F5122D Operating Manual

Also see for IC-F5122D: Service manual Instruction manual Instruction manual

Contents

Icom IC-F5122D Operating Manual Manual pdf 8 page image

52 dPMR OPERATIOND Receiving a Stun, Kill or ReviveIf an Individual call with a Stun or Kill command is received,the transceiver will display “SORRY” and you can not receive*or transmit.* Depending on the received Stun command setting. Revive signalscan always be received.➥ When a Stun command is received:• The transceiver cannot be operated until an Individual call a Re-vive command is received, or you enter a password.➥ When a Kill command is received:• The transceiver cannot be operated until data cloning is per-formed. Ask your dealer for details.NOTE: Depending on the preprogramming, the transceivercan ignore the Stun, Revive and Kill commands that arefrom a non-specified station.D Receiving a Status Polling callIf a Status Polling call is received, the transceiver will auto-matically transmit its current status.D Receiving an Ambience Listening callIf an Individual call with an Ambience Listening command isreceived from a specified station, the transceiver will auto-matically transmit its microphone audio.• The HM-148G or HM-152/152T hand microphone is required.NOTE: If the transceiver receives an Ambience Listeningcommand from a station other than the specified one, thecall will be ignored, and the transceiver will not transmit itsmicrophone audio.D Receiving an Emergency callq When an emergency call is received:• Beeps sound.• The state of the backlight depends on the Backlight setting inthe User Set mode. When “LIGT AUT” is selected, the backlightturns ON for the preprogrammed time period. (Auto BacklightTimer)w To clear the beep, ID and message display, turn OFF thepower or change the channel.