Icom IC-F5360D Operating Instructions Manual

Also see for IC-F5360D: Instructions

Contents

Icom IC-F5360D Operating Instructions Manual Manual pdf 5 page image

1 PANEL DESCRIPTION1-3Function displayq SIGNAL STRENGTH INDICATORDisplays the relative receive signal strength.w LOW OUTPUT POWER ICONDisplayed when low output power is selected.e AUDIBLE ICONDisplayed when the channel is in the ‘audible’ (un-mute) mode.r SCRAMBLER ICONDisplayed when the Voice Scrambler function is ON.t SCAN ICONDisplayed while scanning.y MESSAGE ICONDisplayed when a received message (Short Data➥Message or Status Message) is stored in thememory stack.Blinks when an unread message is in the memory➥stack.u BELL ICONBlinks when a matched signal is received, depend-ing on the presetting.i GPS ICONDisplayed when position data is received.o HORN ALERT ICONDisplayed when the Horn Alert function is ON.!0 PUBLIC ADDRESS ICONDisplayed when the Public Address function is ON.!1 ALPHANUMERIC READOUTDisplays the operating channel number, channelname, menu contents, DTMF code, and so on.• The display mode automatically switches between oneline and two lines.!2 KEY ICONSDisplay the assigned function of the [P0], [P1], [P2]and [P3] dealer assignable keys.!3 SCAN TARGET ZONE ICONDisplayed when the scan target zone is selected.!4 PA SPEAKER ICONDisplayed when the External speaker function is ON.When the External speaker function is ON, the PAspeaker that is connected to the D-Sub 15-pin will beenabled.!5 AUX A ICONDisplayed when the AUX A port is activate.!6 AUX B ICONDisplayed when the AUX B port is activate.!7 SCAN TARGET CHANNEL ICONDisplayed when the scan target channel is selected.!8 OPERATOR SELECTABLE TONE ICONDisplayed when the OST (Operator Selectable Tone)function is ON.IC-F5360Dq w e r t y u i o !0!2!1 !3 !4 !5 !6 !7 !8