Icom IC-F6062 Instruction Manual

Also see for IC-F5062: Operating guide Servise manual Service manual Instruction manual Instruction manual

Contents

Icom IC-F6062 Instruction Manual Manual pdf 2 page image

iEXPLICIT DEFINITIONSRWARNING! NEVER connect the transceiver to anAC outlet. This may pose a fire hazard or result in an electricshock.NEVER connect the transceiver to a power source of morethan 16 V DC such as a 24 V battery. This connection will ruinthe transceiver.NEVER cut the DC power cable between the DC plug andfuse holder. If an incorrect connection is made after cutting,the transceiver might be damaged.NEVER place the transceiver where normal operation ofthe vehicle may be hindered or where it could cause bodilyinjury.NEVER allow children to touch the transceiver.NEVER expose the transceiver to rain, snow or any liquids.USE the specified microphone only. Other microphoneshave different pin assignments and may damage the trans-ceiver.DO NOT use or place the transceiver in areas with tem-peratures below –25°C or above +55°C, or in areas subject todirect sunlight, such as the dashboard.PRECAUTIONSWORD DEFINITIONRWARNING Personal injury, fire hazard or electric shockmay occur.CAUTION Equipment damage may occur.NOTE If disregarded, inconvenience only. No riskof personal injury, fire or electric shock.READ ALL INSTRUCTIONS carefully and com-pletely before using the transceiver.SAVE THIS INSTRUCTION MANUAL — Thisinstruction manual contains important operating instructionsfor the IC-F5062 and IC-F6062 VHF/UHF MOBILE TRANS-CEIVERS.IMPORTANTIcom, Icom Inc. and the logo are registered trademarks of IcomIncorporated (Japan) in the United States, the United Kingdom, Germany,France, Spain, Russia and/or other countries.LTR is a registered trademark of the E.F.Johnson Company.All other products or brands are registered trademarks or trademarks of theirrespective holders.See the operating guide for details of BIIS, MDC and LTR®system operations. Ask your dealer for details.