Icom IC-F61-L Instruction Manual

Also see for IC-F61-L: Instruction manual

Icom IC-F61-L Instruction Manual Manual pdf 21 page image

123CONVENTIONAL OPERATION23■ Turning power ONq Rotate [VOL] to turn power ON.w If the transceiver is programmed for a start up passcode, inputdigit codes as directed by your dealer.• The keys in the table below can be used for password input:• The transceiver detects numbers in the same block as identical.Therefore “01234” and “56789” are the same.KEYNUMBER 0549382716e When the “PASSWORD” indication does not clear after input-ting 4 digits, the input code number may be incorrect. Turn thepower off and start over in this case.■ Channel selectionSeveral types of channel selections are available. Methods maydiffer according to your system set up.NON-BANK TYPE:Push [ ]/[ ] to select the desired operating channel, in se-quence; or, push one of the [MR-CH 1] to [MR-CH 4] keys to selecta channel directly.BANK-TYPE:Push [Bank], then push [ ] or [ ] to select the desired bank.AUTOMATIC SCAN TYPE:Channel setting is not necessary for this type. When turning thepower ON, the transceiver automatically starts scanning. Scanningstops when receiving a call.