Icom IC-F61M Instruction Manual

Also see for IC-F61M: Instruction manual Instruction manual Instruction manual

Icom IC-F61M Instruction Manual Manual pdf 24 page image

173 BASIC OPERATIOND TX code channel selectionIf the transcever has [TX Code CH Select] assgned to t, the nd-caton can be toggled between the operatng channel number (orname) and TX code channel number (or name). When the TX codechannel number (or name) s dsplayed, [CH Up] or [CH Down] se-lects the TX code channel.USING [TX CODE CH SELECT] KEY:q Push [TX Code CH Select]— a TX code channel number (orname) appears.w Push [CH Up] / [CH Down] to select the desred TX code chan-nel.e After selectng, push [TX Code CH Select] to set.• Return to the stand-by mode.r Push [Call] to transmt the selected TX code.USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:If the transcever has a [TX Code CH Up] or [TX Code CH Down]key assgnment, the programmed TX code channel can be se-lected drectly when pushed.D TX code number editIf the transcever has [TX Code CH Select] or [TX Code Enter] as-sgned to t, TX code contents can be edted wthn the allowabledgts.USING [TX CODE CH SELECT] KEY:q Push [TX Code CH Select] to enter the TX code channel selec-ton mode.• Select the desred operatng channel before enterng the TX codechannel selecton mode f necessary.w Push [TX Code CH Select] for 1 sec. to enter the TX code edtmode.• The dgt to be edted blnks.