Icom IC-F61M Instruction Manual

Also see for IC-F61M: Instruction manual Instruction manual Instruction manual

Icom IC-F61M Instruction Manual Manual pdf 20 page image

133 BASIC OPERATION■ Turning power ONq Rotate [VOL] to turn power ON.• When the opening vibration function is turned ON, the transceivervibrates for 2 sec. Ask your dealer for details.w If the transceiver is programmed for a start up password, inputdigit codes as directed by your dealer.• The keys in the table below can be used for password input:• The transceiver detects numbers in the same block as identical.Therefore “01234” and “56789” are the same.KEYNUMBER 0549382716ore When the “PASSWORD” indication does not clear after input-ting 4 digits, the input code number may be incorrect. Turn thepower off and start over in this case.■ Channel selectionSeveral types of channel selections are available. Methods maydiffer depending on your system set up.NON-ZONE TYPE:Push [CH Up]/[CH Down] to select the desired operating channelin sequence; or, push one of [MR-CH 1] to [MR-CH 4] to select achannel directly.ZONE TYPE:Push [Zone] then push [CH Up]/[CH Down] to select the desired zone.AUTOMATIC SCAN TYPE:Channel setting is not necessary for this type. When turning thepower ON, the transceiver automatically starts scanning. Scanningstops when receiving a call.