Icom IC-F61M Instruction Manual

Also see for IC-F61M: Instruction manual Instruction manual Instruction manual

Icom IC-F61M Instruction Manual Manual pdf 23 page image

163BASIC OPERATION3D Receiving note• Vibration function (Depends on the version)When the matched RX code signal is received, the transceivermay vibrate for a specific time period, depending on the pre-set-ting. Push any key or [PTT] to stop the vibration.NOTE:• The transceiver cannot stop the vibration suddenly after push-ing any key or [PTT].• The vibration sound may be heard at the communication party,or be recorded if the recording function is activated when [PTT]is pushed to stop the vibration.D Transmitting notes• Transmit inhibit functionThe transceiver has several inhibit functions which restrict trans-mission under the following conditions:- The channel is in mute condition (‘Inaudible’ condition; “ ”does not appear).- The channel is busy.- Un-matched (or matched) CTCSS is received. (Depending onthe pre-setting)- The selected channel is a ‘receive only’ channel.• Time-out timerAfter continuous transmission for the pre-programmed time period,the time-out timer starts, causing the transceiver to stop transmitting.• Penalty timerOnce the time-out timer starts, transmission is further inhibited fora period determined by the penalty timer.