Icom IC-F70DT Instruction Manual

Also see for IC-F70DS: Operating guide Instruction manual Service manual Instruction manual

Icom IC-F70DT Instruction Manual Manual pdf 20 page image

163 BASIC OPERATIOND Individual ID code selection(Digital mode operation only)If the transceiver has [Individual] assigned to it, the indicationcan be toggled between the operating channel number (orname) and Individual ID code (or name). When the IndividualID code (or name) is displayed, [CH Up] or [CH Down] se-lects the desired Individual ID code.q Push [Individual]— an Individual ID code (or name) ap-pears.w Push [CH Up] or [CH Down] to select the desired Indi-vidual ID code.e Push [PTT] to transmit the selected Individual ID code.r Push [Individual]— cancels the selected Individual ID code(return to the pre-set Talkgroup ID code in the channel.)D Talkgroup ID code selection(Digital mode operation only)If the transceiver has [Talkgroup] assigned to it, the indicationcan be toggled between the operating channel number (orname) and Talkgroup ID code (or name). When the TalkgroupID code (or name) is displayed, [CH Up] or [CH Down] se-lects the desired Talkgroup ID code.q Push [Talkgroup]— a Talkgroup ID code (or name) ap-pears.w Push [CH Up] or [CH Down] to select the desired Talk-group ID code.e Push [PTT] to transmit the selected Talkgroup ID code.r Change the channel— cancels the selected Talkgroup IDcode (return to the pre-set Talkgroup ID code in the chan-nel.)D DTMF transmissionIf the transceiver has [DTMF Autodial] assigned to it, theautomatic DTMF transmission function is available. Up to 8DTMF channels are available.TO SELECT A TX CODE:q Push [DTMF Autodial]— a DTMF channel appears.w Push [CH Up] or [CH Down] to select the desired DTMFchannel.e Push [DTMF Autodial] to transmit the DTMF code in theselected DTMF channel.