Icom IC-F8100 Instruction Manual

Also see for IC-F8100: Instruction manual Instruction manual Service manual Service manual Manual

Icom IC-F8100 Instruction Manual Manual pdf 67 page image

862OPTIONS1234567891011121314151617 Quick ReferenceAT-140 automatic antenna tunerAntenna and control cable receptaclesfor easy installation, and a tuner bypassfunction is available.OPC-2142 shielded control cableThe shielded control cable protects thetransceiver from RF feedback and ex-tends the separation between the AT-140and the transceiver up to 10 meters (32.8feet). OPC-2142: 4 pinOPC-2143 shielded control cableThe shielded control cable protects thetransceiver from RF feedback and ex-tends the separation between the AT230and the transceiver up to 5 meters (16.4feet).OPC-2205 shielded control cableThe shielded control cable protects thetransceiver from RF feedback and con-nects the AT-140 or a GPS receiver to thetransceiver.AD-119 junction boxAllows you to connect the AT-140, AT230,an external modem or PC to the trans-ceiver.MB-126 mounting bracketCFU-F8100 cooling fanRMK-6 separation kitThe same as that supplied with the IC-F8100 Separated Type.Allows you to install the transceiver frontpanel separate from the Main unit for op-erating convenience. The RMK-6 requireseither the OPC-607, OPC-608, OPC-609or OPC-726 separation cable.OPC-607/OPC-608/OPC-609/OPC-726separation cableOPC-607 : 3 m (9.8 ft)OPC-608 : 8 m (26.2 ft)OPC-609 : 1.9 m (6.2 ft)OPC-726 : 5 m (16.4 ft)Recommended Automatic tuning antenna, AT230 from Moonraker Australia Pty. LimitedThe AT230 is a 2.6 m (8.5 ft) length mobile whip antenna with an automatic tuning function. Theantenna matches 2–30 MHz continuously. Use the optional OPC-2143 cable for use with the IC-F8100. Ask your dealer for details.SP-10, SP-22, SP-30, SP-35Lexternal speakersA mounting bracket is supplied with thespeaker.Impedance: 4 ΩMax. AF input: 5 W (SP-10)7 W (SP-22, SP-35L)30 W (SP-30)HM-193 hand microphoneThe same as that supplied with the IC-F8100 One package type or SeparatedType.HM-192 remote control microphoneThe same as that supplied with the IC-F8100 Remote control microphone type.Allows you to remotely control the trans-ceiver with the microphone. The HM-193requires either the OPC-607, OPC-608,OPC-609 or OPC-726 separation cable.