Icom IC-F8101 Instruction Manual

Also see for IC-F8101: Service manual Service manual Instruction manual

Icom IC-F8101 Instruction Manual Manual pdf 11 page image

51PANEL DESCRIPTION1234567891011121314151617 Quick Referenceq RECEIVE/TRANSMIT ICON➥ “ RX” appears when signals are received or thesquelch is open.➥ “ TX” appears when transmitting.w S-METER/TX METERS➥ Displays the receive signal strength.➥ Displays the transmit output power.e TUNE ICONAppears after the automatic antenna tuner matchesthe transceiver and antenna.NOTE:Appears only when the frequency is set to within±1% of the tuned frequency.r OUTPUT POWER ICON➥ “HI” appears when high power is selected.➥ “MID” appears when mid power is selected.➥ “LOW” appears when low power is selected.t OPERATING MODE INDICATORDisplays the selected operating mode.• “LSB,” “USB,” “CW,” “AM,” RTTY,” “LSBD1,” “USBD1,”“LSBD2,” “USBD2,” “LSBD3” or “USBD3” appears, de-pending on the operating mode.Selectable operating modes differ depending on thetransceiver version and/or presetting.y MUTE ICON➥ “S” appears when the Call squelch function is se-lected.➥ “L” appears when the S-meter squelch is se-lected.➥ “V” appears when the Voice squelch is selected.u CLEAR TALK ICONAppears when the Clear Talk function is ON.i MAIN READOUTSDisplays the channel name.Displays the operating frequency.o SUB READOUTSDisplays the selected information.• ‘Frequencies,’ ‘Latitude and Longitude,’ ‘Direction and El-evation,’ ‘Antenna SWR and Power source voltage’ and‘Date and Time’ can be displayed.‘Latitude and Longitude’ and ‘Direction and Elevation’ re-quire data from a GPS unit.• When the frequencies are displayed, the receive fre-quency is displayed on the right and the transmit fre-quency is displayed on the left.• “u” appears beside the receive or transmit frequencies,and indicates which one is active.• “p” or “q” appears instead of “u” to the right of the re-ceive frequency, when the Clarifier function is ON, and itindicates the upper or lower shift.NOTE: No transmit frequency is displayed whenthe selected channel is configured as “receiveonly.”Shows the transmit or receive frequency when VFOsplit is ON.!0 FUNCTION DISPLAYDisplays the function of the [§], [§§] and [§§§] func-tion keys.!1 VFO ICON➥ “A” appears when VFO A is selected.➥ “B” appears when VFO B is selected.!2 CLARIFIER ICON“p” or “q” appears when the Clarifier function isON, and indicates the upper or lower shift.• Memory Channel Display • VFO Displayq w r t yu q w r t y ue e!1!3!2ioio!0 !0!2■ LCD screenContinued on the next page.