Icom IC-FR6000-L Instruction Manual

Also see for iC-FR5000: Price list Service manual Insrtuction manual Instruction manual Instruction manual

Contents

62INSTALLATION AND CONNECTIONSn Power supply connectionMake sure the repeater’s power is turned OFF whenconnecting a DC power cable.R WARNING! NEVER apply more than 16 V DC tothe DC power receptacle on the repeater rear panel.This could cause a fire or damage the repeater.n Mounting the repeaterD Using the supplied handlesThe supplied handles are used when mounting the re-peater into a 19 inch rack. The handles are installed onthe repeater’s front panel.q Attach the supplied handles to both sides of the re-peater’s front panel with the spacers, then tightenthe screws as shown below.P 0 P 1 P 2 P 3 P 4HandleSpacerScreww The completed installation should look like the illus-tration below.P 0 P 1 P 2 P 3 P 4123456789101112131415161718192021n Fuse replacementIf a fuse blows, or the repeater stops functioning, findthe source of the problem, repair it and then replacethe damaged fuse with a new rated one.CAUTION: DO NOT replace the fuse with the DCpower cable connected to the repeater. Disconnectthe cable to prevent electric shock and/or equip-ment damage.D Line fuse replacementFuse rating: 20 AUSE only a 20 A fuse.Fuse rating: 1 AUSE only a 1 A fuse.