Icom IC-G88 Operating Manual

Also see for IC-G88: Instructions Instructions

Contents

Icom IC-G88 Operating Manual Manual pdf 9 page image

47SET MODESVFO Set modeTuning StepWhen you select the operatingfrequency by pushing [UP] or[DOWN], the frequency changes in this selectedtuning step.The set tuning step is also used for a VFO scan.• Select 5, 10, 12.5, 15.0, 20.0, 25.0, 30.0 or 50.0. (in kHz)Reverse DuplexSelects “ON” when reversingthe duplex frequency.• Select “OF” (OFF) for Normal Duplex communications.Frequency offsetSets the frequency offset for theduplex operation.In the duplex mode, the transmitfrequency shifts up or down from the receive fre-quency by the offset amount.When the Reverse Duplex is set to OFF, the transmitfrequency shifts from the operating frequency.When the Reverse Duplex is set to ON, the receivefrequency shifts from the operating frequency.• Set between 0 ~ 20 (in MHz)DTCS CodeSelects the DTCS code for theDTCS squelch operation.Settable DTCS codes:Output PowerSelects the default outputpower of each channel.• Select L1 (Low1: 1 W), L2 (Low2: 2 W) or H (High: 5.5 W).TIP: Lower output power during short-range communica-tions may reduce the possibility of interference toother stations.BandwidthSets the bandwidth (channelspacing).• Select N (Narrow: 12.5 kHz) or W (Wide: 25 kHz).Repeater Tone FrequencySets the subaudible tonefrequency that is needed toaccess the repeater.Settable frequencies:Tone Squelch FrequencySets the CTCSS tone fre-quency for the tone squelchoperation.Settable frequencies:Exiting the VFO Set mode:➥ Hold down [VFO / User Set Mode] again to exit theVFO Set mode.The VFO Set mode enables you to change various settings for the operation in the VFO mode. You can change theoperating condition in this mode.Entering the VFO Set mode:➥ Push [VFO / User Set Mode] to enter the VFO Set mode.• While in the VFO Set mode, push [VFO / User SetMode] again to select an item, and then change thevalue or setting by pushing [UP] or [DOWN].02302502603103203604304705112513113213414315215515616225126126326527130631131533142343143244546446546650350651653254656560661262462763105406507107207307411411511616517217420522322624324424534334635136436537141141241363265466266470371272373173273474375467.069.371.071.974.477.079.782.585.488.591.594.897.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.167.069.371.071.974.477.079.782.585.488.591.594.897.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1(Continued on the next page.)

/ 11

Related manuals for Icom IC-G88