Icom IC-M23 Instruction Manual

Also see for IC-M23: Service manual

Icom IC-M23 Instruction Manual Manual pdf 9 page image

Make sure the rubber seal is properly seated in thegroove and there is dust or other material is on it.Rubber sealGrooveBattery cover Battery coverCorrect position Incorrect positionD Battery packTo remove the battery pack:Slide the latch and then lift the battery cover to remove it.Then remove the battery pack, as shown.To insert the battery pack:Place the battery pack into the transceiver so it fi ts fl at, andthen securely attach the battery cover, as shown.NEVER remove the battery cover when the transceiver iswet or soiled. This may result in water or dust getting intothe transceiver/battery pack, and may result in the trans-ceiver being damaged.CAUTION:• When attaching or removing the battery cover, make surethe rubber seal is correctly set in the groove of the cover.If the seal is not correctly in the groove, it may be dam-aged when attaching the battery cover. If the seal is dam-aged, waterproof protection is not guaranteed.• When attaching the battery cover, make sure dust orother material does not adhere to the rubber seal. If dustor other material is on the seal when attaching the batterycover, waterproof protection may not be guaranteed.32SUPPLIED ACCESSORIES AND ATTACHMENTS12345678910111213141516LatchBattery coverPush the cover untilthe latch comes backto the locked position.Battery cover“Click”Battery pack