Icom IC-M25 Instruction Manual

Also see for IC-M25: Instruction manual Service manual Instruction manual

Icom IC-M25 Instruction Manual Manual pdf 21 page image

134"!3)#/0%2!4 )/.12345678910111213141516N Setting TAG channelsYou can quickly recall often-used channels by tagging themas TAG channels.TAG channels can be independently assigned to each chan-nel group (USA, International and Canada).q Hold down [U/I/C] (CH/WX) for 1 second to change thechannel group, if needed. Repeat to go to the next group.w Select the desired channel you want to set as a TAG channel.e Hold down [*] (FAV) for 1 second. s4 HEDISPLAYEDCHANNELISSETASA4 !' CHANNEL sh ” appears on the display.To select a TAG channel:± Push [FAV] (*) several times to select the desired TAGchannel. s.ON 4 !' channels are skipped.To clear a TAG channel:q Select the desired channel you wan to clear the tagging.w Hold down [*] (FAV) for 1 second. sh ” disappears.To clear all TAG channels:± While holding down [*] (FAV), turn ON the power. s!LL4 !' CHANNELSINTHESELECTEDCHANNELGROUPARECLEAREDN Setting the Call channelYou can recall the most often-used channel with a single op-eration, by setting the channel as a Call channel.A Call channel can be set in each channel group.q Hold down [U/I/C] (CH/WX) for 1 second to change thechannel group. Repeat to go to the next group.w Hold down [9] (16) for 1 second to recall the current Callchannel in the selected group. shCALL” and the Call channel number appear.e Hold down [9] (16) again for 3 seconds (until a long beepchanges to 2 short beeps) to enter the Call channel set-ting mode. s4 HECHANNELNUMBERSTARTSBLINKINGr Push [Y] or [Z] to select the new Call channel.t Push [9] (16) to set. s4 HECHANNELNUMBERSTOPSBLINKING