Icom IC-M410BB Instruction Manual

155 SCAN OPERATION■ Setting Favorite channels(Except for the NLD version)You can quickly recall often-used channels by setting them as Favorite channels. You canset Favorite channels in each Channel Group.1. Select a Channel Group on the Menu screen. (p. 9)[MENU] > Settings > Radio > Channel Group2. Push [▲] or [▼], or rotate [DIAL] to select the channel.3. Push [◄] or [►] to display .4. Push .• The selected channel is set as a Favorite channel, and “ ” is displayed.L To cancel the setting, push again.TIP: You can set all channels as Favorite channels, clear all settings, or reset to thedefaults. By default, some channels are preset as Favorite channels. The presetchannels differ, depending on the transceiver version.■ Starting a scan(Except for the NLD version)Example: Starting a Normal Scan.1. Select a Channel Group on the Menu screen.[MENU] > Settings > Radio > Channel Group2. Push [◄] or [►] to display .3. Push .• The scan starts.• “SCAN” is displayed during a Normal Scan and“SCAN 16” is displayed during a Priority Scan.• “SCAN” and are displayed when a signalis received.L When a signal is received, the scan pausesuntil it disappears, or resumes after 5seconds, depending on the Scan Timersetting in “Radio Settings.”L A beep sounds and “16” blinks when a signalis received on Channel 16 during a Priorityscan.4. To stop the scan, push .TIP: To properly receive signals, be sure toadjust the squelch to a suitable level.FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com