Icom IC-M504A Instruction Manual

Also see for IC-M504A: Instruction manual Instruction manual

Contents

326 DSC OPERATIOND Transmitting a Position Reply CallTransmit a Position Reply Call when a Position Request Callis received.When the Automatic Acknowledgement function is ON (p. 45),the transceiver automatically transmits a reply call after receiv-ing a Position Request Call.q Enter “Position Reply” in the DSC menu. shPosition Reply” item appears after a position request callis received.eDSC Menuf ¶ ePosition Replyf(Push [MENU]) (Rotate [DIAL], then push ;$)!,s%.4%2=.)w Rotate [DIAL] to select the desired individual address orID code, then push ;$)!,s%.4%2=.--DSC Menu--Select AddressJohn˘PaulGeorgeMichael ˘ Exit / ENT ˘OK>When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-nected, next steps e and r (Current position/time pro-gramming) do not appear. Go to step t.e The position information appears. Rotate [DIAL] to edityour position data (latitude and longitude). (p. 18)r After editing the position data, push ;$)!,s%.4%2= to pro-gram. Rotate [DIAL] to edit the current UTC time, thenpush ;$)!,s%.4%2=. (p. 18) s!FTERPUSHING;$)!,s%.4%2=, “Position Reply Ready”is displayed.--DSC Menu--Position Reply Ready ˘ Exit / ENT ˘OK>t Push ;$)!,s%.4%2= to transmit the Position Reply Call tothe selected station. s9OURPOSITIONDATAISTRANSMITTEDs%MERGENCYCHANNEL#HANNEL ISAUTOMATICALLYSELECTED s If Channel 70 is busy, the transceiver stands by until the channelbecomes clear.