Icom IC-M603 Instruction Manual

Also see for IC-M603: Instruction manual Instruction manual Instruction manual Instruction manual

Contents

42 PANEL DESCRIPTION➥ Number input: ‘7’➥ Comment input: ‘7,’ ‘P,’ ‘R,’ ‘S,’ ‘p,’ ‘r’ or ‘s’➥ After pushing [F], push to turn the Hailer func-tion ON or OFF. (p. 40)➥ After pushing [F], push and hold for 1 sec. toturn the RX speaker function ON or OFF. (p. 42)➥ Number input: ‘8’➥ Comment input: ‘8,’ ‘T,’ ‘U,’ ‘V,’ ‘t,’ ‘u’ or ‘v’➥ After pushing [F], push to turn the Automaticfoghorn function ON or OFF. (p. 42)➥ Number input: ‘9’➥ Comment input: ‘9,’ ‘W,’ ‘X,’ ‘Y,’ ‘w,’ ‘x’ or ‘y’➥ After pushing [F], push to turn the Intercomfunction ON or OFF. (p. 39)➥ Number input: ‘0’➥ Number input: Push and hold for 1 sec. to edit‘A’ for simplex channel.➥ Comment input: ‘0’ and symbols (‘–’ ‘/’ ‘.’)➥ After pushing [F], push to activate an optionalVoice scrambler function. (p. 12)• The optional Voice Scrambler function cannot beused on Channels 16 and 70.➥ Push to enter the input channel comment, se-lected item, etc.➥ Push to clear the entered data.■ Function displayBUSY 25W INT CALLRX DUPSCRAM TAGNORMAL SCAN-34°34.506N123°23.236WUTC 1:10 CALLINGq w e r t y!4!3!2 iuo!1!0q RX SPEAKER INDICATOR (p. 42)Appears during the RX speaker mode.w POWER INDICATOR (p. 9)➥ “25W” appears when high power is selected.➥ “1W” appears when low power is selected.e TAG CHANNEL INDICATOR (p. 15)Appears when a TAG channel is selected.r DUPLEX INDICATOR (p. 8)Appears when a duplex channel is selected.