386 DSC OPERATIONDD Offset TimeThis item sets the offset time from the UTC (Universal TimeCoordinated) time.q Enter “OOffffsseett TTiimmee” in DSC Set up menu.w Set the offset time from the UTC (Universal Time Coordi-nated) time.• Edit the digit of offset time directly with the keypad.• Push [0• –/.] to edit “--” or “++”, when the cursor is on the first digit.• Rotate [SELECTOR] to move the cursor backward or forward.• Push [CE] to clear the time data.• Push [CLR] to cancel and exit the condition to DSC set up menu.e Push [ENT] to set and to exit the condition to DSC set upmenu.r Push [CLR] or rotate [SELECTOR] to select “EExxiitt,”push [ENT] to return to the DSC menu.• Repeat again to return to the normal operation condition.DD NMEA OutputSelect an NMEA Output function from List Station, All Stationor OFF.When receiving position acknowledgment, the transceiveroutputs it to the external equipment via the NMEA connector.q Enter “NNMMEEAA OOuuttppuutt” in DSC menu.w Rotate [SELECTOR] to select the NMEA Output functionfrom List Station, All Station or OFF.• List Station : Outputs the position data from the specified ves-sels listed on the DSC individual ID screen.• All Station : Outputs the position data from all vessels.• OFF : Outputs no position data to external equipment.e Push [ENT] to set and to exit the condition to DSC set upmenu.• Push [CLR] to cancel and exit the condition to DSC set up menu.r Push [CLR] or rotate [SELECTOR] to select “EExxiitt,”push [ENT] to return to the DSC menu.• Repeat again to return to the normal operation condition.--DSC Menu--NMEA Output˘List StationAll StationOFF˘Exit / ENT˘OK>DDSSCC MMeennuu ➪ SSeett uupp ➪ NNMMEEAA OOuuttppuutt(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)--DSC Menu--Input Offset Time000:00 / ENT˘OK>No offset time (default)+12 hours / ENT˘OK>--DSC Menu--Input Offset Time+12:00DDSSCC MMeennuu ➪ SSeett uupp ➪ OOffffsseett TTiimmee(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)